TECHNICAL DOCUMENTATION & INSTRUCTIONS

Guide & Frequently Asked Questions

How it works, what is automated, what must be toggled manually, and key boundaries on HyperOS 1–4 / MIUI.

1
STEP 1 — START HERE

Install the FixThongBao App

Fastest route: download the APK below and install it right on the phone — no computer needed. If you later run the cabled tool, it also checks for you: installs if missing, updates if outdated, does nothing if current.

The app is fully supported and runs smoothly across HyperOS 1, 2, 3, 4 and MIUI. One install note: if tapping the APK shows "App not installed" (certain ROM builds block tap-installing legacy packages), just plug in the cable and run STEP 3 once — the tool installs the app for you.

Why it comes first: HyperOS periodically overwrites all 8 protection lists, which is when notifications start lagging again. The app stays on the phone to detect that and restore the missing entries in about 0.6 seconds — including the list that decides whether an app may be woken while the screen is off. Skip this step and you would be re-running the cable every few days.

1

Download the APK

Tap the button below. When prompted, allow your browser to install apps from unknown sources.

2

Grant "Modify system settings"

Open the app and tap the orange warning card. This is the only permission it needs to write the list.

3

Turn on "Automatic protection"

The switch on the Home tab. The app starts watching the list immediately.

4

Set battery & enable Autostart

So HyperOS does not freeze the watchdog itself. Step 4 below has the details.

Video guide: Installing & granting permissions for FixThongBao

Watch on YouTube
2
STEP 2 — PREPARE FOR STEP 3

Enable Developer Options & the 3 USB Debugging Toggles

Only needed when you actually have to use the cable — that is, when notifications are still late after the app has done its part. Turn on all three toggles below; this is what lets the computer see the phone and lets higher-privilege commands through. Once per device.

STEP 1Developer

Enable Developer Options

Go to Settings → About phone.

👉 Tap continuously 7 times on "OS version" (or MIUI version) until phone displays: "You are now a developer!".
STEP 2Settings

Open Developer Options

Return to main Settings screen.

Scroll down and select:
Additional settings → Developer options.

STEP 3MANDATORY

Turn ON All Three Toggles

1. USB debugging→ Toggle ON
2. Install via USB→ Toggle ON
3. USB debugging (Security settings)→ Toggle ON
STEP 4CONFIRM

Connect Cable & Authorize

Connect phone to computer with USB cable. Your phone will prompt:

"Allow USB debugging?"

👉 Check: "Always allow from this computer" → Tap OK / Allow.

Why all three toggles matter — and Xiaomi’s security requirement:

Without "USB debugging" the computer cannot see the phone. Without "Install via USB" Xiaomi blocks the tool from installing the FixThongBao app for you. Without "USB debugging (Security settings)" the higher-privilege commands are refused.

When enabling the last two, Xiaomi displays a 3-step 5-second countdown warning (Tap Next → Accept). On certain China ROM models, Xiaomi may require an active SIM card with mobile data or a signed-in Mi Account to enable this security permission.

3
STEP 3 — ONLY IF STILL LATE

Plug In, Pick the Apps & Run

Use this when you have installed the app, granted the permission, set battery to “No restrictions”, turned “Battery saver” off, tested properly for 15–20 minutes, and notifications are still late. What remains is the higher-privilege group: AppOps (including “Autostart”), Doze, App Standby, background data policy, and the “stopped” flag. The tool scans your device so you can tick the apps whose notifications go missing, then runs those commands — and hands your selection to the FixThongBao app.

Open the Tool & Pick Apps
4
STEP 4 · MANDATORY STEP ON YOUR PHONE

Set "Battery Saver = No Restrictions" For Each App

Xiaomi guards “Battery saver → No restrictions” behind a proprietary permission, so NEITHER the Android app NOR the cabled web tool can write it — you must toggle it by hand. “Autostart”, by contrast, IS set by the cabled tool for the apps you tick in that run; apps installed later still need a manual toggle or one more cable run:

1

Open Manage Apps

Go to Settings → Apps → Manage apps.

2

Select Target App

Choose apps requiring instant notifications: WhatsApp, Telegram, Messenger...

3

Turn Autostart ON

Choose Battery saver → No restrictions. (Also turn "Autostart" on; the cabled tool can do that part for you, the rest is a manual tap.)

✅ NOTIFICATION PERMISSIONS ARE 100% AUTOMATED

Our tool automatically unblocks all notification channels for each selected app — including wake-up channels during deep sleep — and verifies them via ADB readback. No manual channel setup required.

Only 2 manual toggles: Autostart = ON and Battery Saver = No restrictions. Xiaomi guards these behind proprietary permission gates.

If alerts still delay: verify Settings → Apps → [app] → Battery Saver is set to "No restrictions". Certain specific China ROMs enforce an extra aggressive battery manager.

Reboots & Adding New Apps

After a reboot

Most settings live in the system settings store and survive. The 8 protection lists are the exception: HyperOS tends to rebuild them and drop Google Play services — the single most common reason notifications break again days later. With the FixThongBao app installed, it notices and restores the missing entries in about 0.6 seconds, even right after boot, with nothing for you to do. Without the app, re-plug the cable and re-run in seconds, with zero data loss.

Adding a new app — in the app, no cable

Once a new app is installed, open FixThongBao → "Apps" tab → flip its switch. No computer, no cable. The app writes all 8 protection lists for it, including the wake list — the layer measured as the main cause of missed pushes. Do not forget to set "Battery saver = No restrictions" for that new app by hand; "Autostart" is set by the cabled tool, or you can toggle it yourself.

When the cable is still needed

The layers that need the system UID — AppOps, Doze, App Standby, background data policy, the "stopped" flag — are beyond the app’s reach. So when you install a new app, or after a major ROM upgrade, plug the cable in and run the tool once to cover those layers for the new app. Free and unlimited.

Frequently Asked Questions (FAQ)

Answers regarding safety, battery standby, and technical principles.

Does this method require Root or Bootloader Unlock?

Absolutely NOT. The entire mechanism relies on standard secure WebUSB browser protocols. The system configures high-level Android settings without modifying system partitions, flashing custom binaries, or requiring root access.

How is the Android app different from the web tool? Do I need both?

Only when the phone is STILL late after the app has done its part. The app stays resident and writes plus re-repairs all 8 HyperOS protection lists — including the list that decides whether an app may be WOKEN while the screen is off — so most phones are done at that point. The cabled web tool is the escalation path: it sets the layers that need the system UID and that the app cannot write — AppOps (background execution, wakeups, and “Autostart” too), Doze, App Standby, background data policy and the “stopped” flag. Those layers last for days, so one run is enough. In short: the app covers most cases and keeps it from BREAKING AGAIN; the web tool is for the hard phones.

Does this drain more battery than normal?

Generally no noticeable extra drain — we have not measured a specific figure, so we do not promise it saves battery. Without this fix, users frequently "padlock" apps in memory, forcing the CPU to continuously maintain full background state in RAM. With our whitelist approach, the system only preserves low-power push listeners instead of repeated aggressive wake-kill cycles.

Will the configuration persist after rebooting the phone?

Most configuration survives a reboot because it lives in the system settings store. The exception is the 8 protection lists: HyperOS rebuilds them after boot and typically drops Google Play services — the single most common reason notifications break again days later. The FixThongBao app exists for exactly this: it detects the overwrite and restores the missing entries in about 0.6 seconds, including right after a reboot. So: install the app if you have not; if you have, open the Home tab and check that "Automatic protection" is on and the status line reports the device as protected. Without the app, re-plug the cable and re-run in seconds.

Does this affect warranty, banking apps, or Google Pay?

The tool only writes system settings keys via USB: NO bootloader unlock, NO root, NO system partition modifications — so Play Integrity certifications stay valid. BUT there is one thing you must turn off yourself: VNeID and some banking apps check whether USB debugging / Developer options is enabled and may refuse to run when they see it. After the cable run, open Settings → type "developer" in the search box → turn off USB debugging, then turn off the Developer options switch at the top of that screen. Turning it off does NOT undo the fix; turn it back on when you next need the cable. To be straight with you: we cannot test every banking app, so tell us if a specific one misbehaves.

What can this tool NOT fix?

Under normal circumstances, notifications arrive almost instantly even when the screen is locked. Measured boundaries on real devices: (1) Rare 30-50s delay immediately after network reconnects, due to Google Play Services FCM heartbeat timing in the Android framework. Once reconnected, subsequent messages arrive instantly. (2) Battery saver (“No restrictions”) must be set by hand, because Xiaomi guards it behind a proprietary permission. “Autostart” IS written by the cabled tool (op 10008, then read back to verify) — the Android app cannot, as it needs the shell UID. (3) System settings character budget: Android limits system settings keys to 20,000 characters per calling package, capping the number of apps that fit. (4) ADDING A NEW APP: you can do it right inside the Android app with no cable, but that covers the 8 protection lists only. To give the new app the full set of system-UID layers, run the cabled tool again. Currently supports Xiaomi / Redmi / POCO only; vivo, OPPO, Realme are not yet supported.

What is automated vs what must be adjusted manually?

NOTIFICATION CHANNELS: 100% AUTOMATED. The system unblocks all notification channels for your selected apps, including wake-up channels during deep sleep, and reads them back to verify. BATTERY RESTRICTIONS: 1-TIME MANUAL STEP. “Battery saver → No restrictions” is guarded behind Xiaomi proprietary vendor security, so no remote tool can write it; after optimization a short guide shows you where to tap, about 30 seconds per app. AUTOSTART: the cabled tool sets it for the apps you tick in that run (the Android app cannot, as it needs the shell UID); apps installed later need a manual toggle.

Does FixThongBao collect personal data or read my messages?

Complete transparency, split in two. (A) THE ANDROID APP sends almost nothing: a single call to confirm whether the device is registered, carrying the Serial (or Android ID when the serial is unreadable), model, Android/ROM version and app version. After that it verifies its licence offline, asking again at most about once every 30 days, and sends NO periodic reports. (B) THE CABLED WEB TOOL, only when you press Run, sends the technical log of that run: your selected package list, the steps performed, write metrics, error traces, duration and your browser. WE NEVER STORE: message contents, contact lists, photos, GPS location, accounts, passwords, or banking data. All technical execution logs are permanently erased after 90 days, and you may request immediate deletion at any time via Telegram.

Why cannot "Autostart" be toggled automatically via computer?

Actually the cabled web tool CAN set it: MIUI uses numeric op 10008 (not the name "AUTO_START"), and the tool writes it and reads it back to verify for the apps you tick in that run. The item that genuinely cannot be written remotely is “Battery saver → No restrictions” — Xiaomi guards it behind a proprietary permission, so neither the Android app nor the cabled tool can touch it, and it costs you about 30 seconds of tapping per app. The Android app also cannot set Autostart because that needs the shell UID; for apps installed later you either tap it yourself or run the cable once more.

Ready to Experience Instant Push Notifications?

One cabled run of about 2 minutes, plus the app that stays on the phone to keep it from breaking again. Start from step 1 above.