Android app

FixThongBao for Android

The app stays on your phone, writes and re-repairs all 8 HyperOS protection lists (fully compatible with HyperOS 1, 2, 3, 4 & MIUI) whenever they get overwritten. No root, no Shizuku, no computer — this is the first step, and for most phones the only one.

Download

Direct APK install. It is not on Google Play because it needs the system-settings write permission.

Download APK 1.2.0
Version
1.2.0 (13)
File name
FixThongBao-1.2.0.apk
Size
1.33 MB
SHA-256

After downloading, check the file name in Downloads: it must contain the exact version shown above. If an older APK is still on the phone, delete it before installing — installing the wrong file is the most common reason the phone keeps running the old build after an update.

Why start with the app

Writes all 8 protection lists

Not just the freeze-exemption list: also the list that decides whether an app may be WOKEN while the screen is off. Without that layer, pushes reach the phone but the app never handles them, so notifications only pop when you open it.

Repairs in about a second

When HyperOS overwrites the list, the app notices and restores it immediately. Measured on a Xiaomi 17 Pro Max: 595 ms.

Always watching, no computer

Once installed it restarts itself after a reboot and re-checks every 15 minutes.

Minimal permissions

Permissions it asks for: “Modify system settings” (to repair the list); background running, restart after boot and a persistent notification (to keep watching); battery-optimisation exemption; network access (only to confirm the licence and check for updates); reading the device code (to licence per device). It reads no messages, contacts, photos, location or accounts.

What the app does, and when you actually need the web tool

Start with the app. Only phones that are STILL late after the app has done its part need the web tool — because what remains requires a higher system privilege that a normal app cannot obtain.

The app does this on its own (no computer)

  • Writes and keeps all 8 HyperOS protection lists (HyperOS 1–4 & MIUI), including the one that wakes apps
  • Detects an overwrite and restores the lists in about a second
  • Switches system locale to Vietnamese (vi-VN) on China ROM devices right inside the app, no SetEdit needed
  • Warns you when “Battery saver” is on, and checks whether Play services is exempt from Doze
  • Restarts itself after a reboot, checks your licence and tells you when an update is out

Only the cabled web tool can do

  • AppOps: background run, wake, foreground start (including “Autostart”)
  • Doze and App Standby Bucket
  • Background data network policy
  • Clear the “stopped” flag and grant runtime notification permission

Those four need the shell UID, which a normal app cannot get. They last for days, so running the web tool once is enough. The app tells you when that step is actually needed.

Install in 4 steps

Step-by-Step Video Guide

How to Install & Configure the FixThongBao App

Watch on YouTube
1

Download and open the APK

Tap the button above. When prompted, allow your browser or file manager to install apps from unknown sources. HyperOS usually shows an extra security warning — choose to continue.

2

Grant “Modify system settings”

Open the app and tap the orange warning card. This is the only permission it needs to write the list.

3

Turn on “Automatic protection”

The app then writes all 8 protection lists and re-repairs them whenever HyperOS overwrites them.

4

Set battery to “No restrictions” and enable Autostart

So HyperOS does not freeze the watchdog itself. The Guide tab has buttons that open the exact settings screens.

Manual Install (if the download will not install)

Not being able to install the app does NOT block the fix — you can still run the cabled web tool, then install the app later with the steps below. Conversely, when you run the cabled web tool it checks and installs/updates the app for you — this section is for when you would rather do it yourself or HyperOS blocks the automatic path.

  1. 1

    Download the APK to the phone

    Tap the "Download APK" button above. The file lands in your phone’s Downloads folder.

  2. 2

    Open it with a file manager

    Open the "Files" app → "Downloads" → tap FixThongBao-1.2.0.apk. Avoid opening it from the browser notification — some ROMs block that path, and the browser may reopen an older file you downloaded earlier.

  3. 3

    Allow install from unknown sources

    If prompted, enable "Allow from this source" for the app you are using to open the file (Files or Chrome), then go back and continue.

  4. 4

    Get past the HyperOS security warning

    The phone will warn that the app is not verified by the store. Tap "Install anyway" / "Continue". If it asks for a Mi Account sign-in or a verification wait, follow the on-screen steps — that is Xiaomi’s requirement for sideloaded apps, not a problem with the APK.

The app runs smoothly on HyperOS 1, 2, 3, 4 and MIUI. If tap-installing shows "App isn't compatible" or "App not installed" (some ROM builds block the installer UI for legacy packages), simply run the cabled web tool once: it installs directly via a system command. If the cable install reports a block, enable "Install via USB" in Developer options (China ROMs usually need a Mi account + SIM) and run again.

Open the cable tool — it installs the app for you

Limitations — stated plainly

  • The app does not fix the root cause: PowerKeeper will still overwrite the lists. The app only puts them back each time.
  • It cannot enable "Autostart" or the "No restrictions" battery label by itself — those two need one manual toggle. The app opens the exact screen for you and re-reads the state to tell you whether you have done it.
  • It cannot add Play services to the Doze exemption list for you — only the system can. The app reads the state and points you to the right screen.
  • Some non-Xiaomi ROMs have no such freeze mechanism, so the app has no effect there.
  • On certain ROM builds, if tap-installing the APK says "App not installed" (when the package installer blocks legacy targets), just plug in the cable ONCE and the web tool installs it via a system command.

How to test it properly

Turn the screen off, leave the phone alone for 15–20 minutes, then ask someone to message you. If the notification arrives within seconds, the fix is working. Do not judge after a few minutes — the freezer only acts when the phone is idle and the screen is off.

Frequently asked questions

Does it need root or Shizuku?

No. It only uses the “Modify system settings” permission that you grant in special app access. No root, no Shizuku, no persistent ADB.

Why an APK instead of Google Play?

Because it writes a vendor-private Xiaomi system setting. That only works when the app is packaged for the legacy compatibility path, which Google Play does not allow.

Do I still need the web tool after installing?

Only if notifications are STILL late after the app has done its part. The app writes all 8 HyperOS protection lists on-device, so most phones need nothing else. If you have granted the permission, set battery to “No restrictions” and turned “Battery saver” off, yet notifications are still late, what remains needs the shell UID (AppOps, Doze, network policy, the “stopped” flag) — that is when you run the web tool once over USB. The app’s Guide tab shows the button for it at exactly that point.

What data does the app send?

Almost nothing. The app contacts the server only to confirm whether this device is registered (and to ask about a newer version while you have it open). That call sends the device code, Android ID, model, Android/ROM version and app version — the server returns a signed licence token, and from then on the app verifies it offline, asking again at most about once every 30 days. The app sends NO periodic status report, no protected-app count, no repair count, and nothing at all from the background. It never sends message contents, contacts, photos, location or account data.

Does it drain the battery?

Barely. Here is exactly what it does in the background: (1) listens for settings changes — passive, free until HyperOS actually overwrites the list; (2) re-reads the list every 15 minutes — a single settings read, no device wake; (3) keeps NO network connection open in the background — the app contacts the server only to confirm the licence (at most about once every 30 days) or while you have it open; (4) holds no wake locks, and the periodic alarm is inexact so the system batches it with other wake-ups instead of waking the device on its own. The persistent notification is low-importance: no sound, no vibration, no screen wake.